Environmental Health & Safety (EHS) Engineering


Global Environmental Network, Inc., is committed to providing the very best environmental, health, and safety engineering plans for our clients and contractors. We continuously strive to comply with applicable laws, regulations, and customer expectations. GENI will prepare your EHS plans in a manner that satisfies legal requirements in the most efficient and economical way possible.

Our mission is to increase our business revenue and profit by maintaining our high standard of quality. To achieve this, we will provide our clients with valuable and economical support services that enable them to comply with regulatory requirements and protect the health and safety of their employees and the environment. Our goal is to be the pre-eminent source of Environmental, Health, & Safety Consulting and Engineering Services for our growing list of satisfied clients.



Environmental Engineering Services

  • Stormwater Pollution Prevention Plan (SWPPP)
  • Water Pollution Control Program (WPCP)
  • Water Quality Management Plan (WQMP)
  • Hazardous Materials Management Plan (HMMP)
  • Excavation and Transportation Plan (XTP)
  • Sampling and Analysis Plan (SAP) for water or soil sampling
  • Water Pollution Control Manager
  • Qualified SW Inspector
  • Registered Geologist (RG)
  • Air Quality Plans
Back to Top ^


Sampling and Monitoring Services

  • Sampling and Laboratory Analysis of air, water, or soil
  • Air Monitoring including oxygen, combustibility, toxic gases, and VOC
  • All services are performed by qualified experts, including:
    • Certified Industrial Hygienist with construction experience
    • IH Technician
    • Registered Geologist
    Back to Top ^

Health & Safety Services

  • Injury & Illness Prevention Plans (IIPP) : We can create or update an IIPP to keep you in full compliance with Cal/OSHA requirements in § 3203 of the California Code of Regulations.
  • Health and Safety Plan (HSP) for Special Hazards: GENI will write or revise Health and Safety Plans for special hazards such as asbestos or lead contaminated soils, petroleum hydrocarbon hazards, etc.
  • Site Safety Plans (SSP) for Construction Projects
  • Certified Industrial Hygienist (CIH)
  • Certified Safety Professional (CSP)
  • Site Health & Safety Officer (SSO)
  • Industrial Hygiene Technician
  • On Site Management
Back to Top ^

Storm Water Pollution Prevention Plan

Our SWPPP is highly detailed and in strict compliance with the General Permit issued by the State of California, State Water Resources Control Board.

Items covered in the SWPPP include:

  • In depth Vicinity Maps including geographic features, construction site perimeter, and general topography.
  • Pollutant Source Identification and BMP selection
  • Inventory of Materials and Activities that May Pollute Storm Water
  • Existing (Pre-Construction) Control Measures such as drainage facilities
  • Nature of Fill Material and Existing Data Describing the Soil
  • Soil Stabilization
  • Sediment Control
  • Tracking Control BMP checklist
  • Wind Erosion Control
  • Non-store Water Control
  • Waste Management and Materials Pollution Control

Our worksheets are comprehensible and extensive references are included.

Back to Top ^

Water Pollution Control Program

The WPCP is a document that must assess the site conditions, sources of sediment and other pollutants in storm water and non-storm water discharges, identify the BMPs that will best suit the construction activities and meet Caltrans and the Clean Water Act pollution control objectives.

Global Environmental Network, Inc. has completed hundreds of WPCP. We are well versed in all aspects of the WPCP including:

  • Water Pollution Control Drawings: Our WPCD illustrates the locations, applications, and deployment of the BMPs.
  • Soil Stabilization Practices: clearly and briefly describes the soil-disturbing activities, such as clearing and grubbing, grading, excavation, trenching, etc.
  • Sediment Control Practices: The appropriate BMPs to be used are thoroughly checked, with sufficient reasons as to why certain BMPs should not be used.
  • Waste Management and Materials Pollution Control BMPs
  • Potential Pollutant Sources
  • Soil Stabilization (Erosion Control) and Sediment Control

Our worksheets are comprehensible and extensive references are included.

Back to Top ^

Water Quality Management Plan (WQMP)

The Water Quality Management Plan (WQMP) you will receive is extensive and highly detailed. A Project WQMP is a plan for managing the quality of stormwater or urban runoff that flows from a developed site after construction is completed and the facilities or structures are occupied and/or operational. A Project WQMP describes the Best Management Practices (BMPs) that will be implemented and maintained throughout the life of a project and is used by property owners, facility operators, tenants, facility employees, maintenance contractors, etc. to prevent and minimize water pollution that can be caused by stormwater or urban runoff. The focus of a WQMP is to prevent and manage the quality of stormwater and urban runoff after construction is completed.

Back to Top ^

Excavation and Transportation Plans

We can prepare or propose Excavation and Transportation Plans for various sites. We can also prepare proposals that discuss remedies for cleanup of:

  • radiologically contaminated soils
  • minor areas of concern such as recharge basins, ecologically sensitive areas, and an ash pit
  • final removal actions such as capping of landfills, excavation of disposal pits and a groundwater treatment system, and planned removal actions such as remediation of a medical isotope facility.
Back to Top ^

Injury Illness Prevention Plan (IIPP)

In California every employer has a legal obligation to provide and maintain a safe and healthful workplace for employees, according to the California Occupational Safety and Health Act of 1973. As of 1991, a written, effective Injury and Illness Prevention (IIP), Program is required for every California employer.
Global Environmental Network, Inc. will develop an effective Program that helps assure the safety and health of employees while on the job. Our experts are trained to write an effective plan that will provide better workplace protection for employees, and to reduce losses resulting from accidents and injuries.

Back to Top ^

Health and Safety Plan for Lead, Asbestos, PHC, etc.

The Health and Safety Plan you will receive is extensive and highly detailed. A thorough, professional analysis of the data by our Certified Industrial Hygienist (CIH) will give you a firm understanding of the work conditions and plan of action you will take in order to protect your employees and subcontractors from hazards related to the contracted work.

Items covered in the Health and Safety Plan include:

  • Initial Exposure Assessment based on SI Reports, specs, and other pertinent document including historical information of the site
  • Objective Data Relating to Potential Exposure
  • Initial, Standard, and Stop work conditions
  • Decontamination Procedures
  • Training & Medical Recording
  • Map, location, and contact information of nearby hospitals
  • Cal/OSHA Regulation

Armed with the professional information we provide, you can protect your workforce with confidence!

Back to Top ^